View 3418_6614758.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ordering information high environmental resistance turquoise switches abs type vde 6.4 19.3 11.1 features subminiature size (19.8 11.1 6.4 mm) sealed construction for use in adverse environment-sealed construction by epoxy resin and rubber cap greatly reduces possible miscontact due to contaminants such as dust. conforming to ip67* of iec protective construction classi?ation elastomer double molding technology, an industry ?st and ultrasonic swaging technology contribute to uniform sealing in high production quantities expansion of low-level circuit type ? e offer a au clad 2-ply contact type (for small loads) that we developed speci?ally for small current and voltage loads in the range of 1 ma to 100 ma and 5 v to 30 v. ul/csa/vde/semko approved (as for au-clad twin layer, vde and semko are not approved.) * based on the protective construction classi?ation of iec, items which satisfy the test requirements are denoted with an ip designation. typical applications ? utomotive home appliances (vacuum cleaner, air puri?r) others (gas cooking range) type of switch abs: turquoise switch s type wire and terminal position 1: 4: 5: straight type right angle left angle te r minal 1: 4: 5: 6: .110 quick-connect terminal solder terminal pc board terminal wire leads contact arrangement 1: 2: 3: spdt spst-nc spst-no actuator 0: 1: 2: 3: 4: 6: 8: pin plunger short hinge lever hinge lever long hinge lever simulated roller lever roller lever leaf lever operating force by pin plunger (max.) 4: 5: 0.98 n 1.47 n contact* 0: 1: 4: agni alloy au-clad triple layer au-clad double layer agency standard 3: 8: 9: ul/csa/semko (agni alloy contact, au-clad triple layer type) vde/semko (agni alloy contact, au-clad triple layer type) ul/csa (au-clad double layer type) ex. abs 1 1 1 0 4 0 remarks: 1. standard packing: dust protected type 100 pcs./carton, 1,000 pcs./case; immersion protected type 50 pcs./case. 2. spst-nc and spst-no are only available for wire leads type. 3. leaf lever is only available for wire leads type 4. as for wire position: 5. not every combination is available. please refer to the following table, ?roduct types? * contact straight type wire opposite to the actuator side type (right angle) wire actuator side type (left angle) agni alloy 0: agni alloy 1 : au-clad triple layer 4 : au-clad double layer agni alloyau-clad cuni alloy au-clad cuni alloy all rights reserved ?copyright matsushita electric works, ltd.
abs1,4,5 product types 1. dust protected type agni alloy au-clad triple layer au-clad double layer * agency standard: please refer to ?rdering information? actuator operating force max. .110 quick-connect terminal solder terminal pc board terminal te r minal position straight right angle left angle pin plunger 0.98 n abs111040* abs141040* abs151040* abs451040* abs551040* 1.47 n abs111050* abs141050* abs151050* abs451050* abs551050* short hinge lever 0.39 n abs111140* abs141140* abs151140* abs451140* abs551140* 0.59 n abs111150* abs141150* abs151150* abs451150* abs551150* hinge lever 0.34 n abs111240* abs141240* abs151240* abs451240* abs551240* 0.54 n abs111250* abs141250* abs151250* abs451250* abs551250* long hinge lever 0.25 n abs111340* abs141340* abs151340* abs451340* abs551340* 0.44 n abs111350* abs141350* abs151350* abs451350* abs551350* simulated roller lever 0.34 n abs111440* abs141440* abs151440* abs451440* abs551440* 0.54 n abs111450* abs141450* abs151450* abs451450* abs551450* roller lever 0.39 n abs111640* abs141640* abs151640* abs451640* abs551640* 0.59 n abs111650* abs141650* abs151650* abs451650* abs551650* actuator operating force max. .110 quick-connect terminal solder terminal pc board terminal te r minal position straight right angle left angle pin plunger 0.98 n abs111041* abs141041* abs151041* abs451041* abs551041* 1.47 n abs111051* abs141051* abs151051* abs451051* abs551051* short hinge lever 0.39 n abs111141* abs141141* abs151141* abs451141* abs551141* 0.59 n abs111151* abs141151* abs151151* abs451151* abs551151* hinge lever 0.34 n abs111241* abs141241* abs151241* abs451241* abs551241* 0.54 n abs111251* abs141251* abs151251* abs451251* abs551251* long hinge lever 0.25 n abs111341* abs141341* abs151341* abs451341* abs551341* 0.44 n abs111351* abs141351* abs151351* abs451351* abs551351* simulated roller lever 0.34 n abs111441* abs141441* abs151441* abs451441* abs551441* 0.54 n abs111451* abs141451* abs151451* abs451451* abs551451* roller lever 0.39 n abs111641* abs141641* abs151641* abs451641* abs551641* 0.59 n abs111651* abs141651* abs151651* abs451651* abs551651* actuator operating force max. .110 quick-connect terminal solder terminal pc board terminal te r minal position straight right angle left angle pin plunger 0.98 n abs111044* abs141044* abs151044* abs451044* abs551044* 1.47 n abs111054* abs141054* abs151054* abs451054* abs551054* short hinge lever 0.39 n abs111144* abs141144* abs151144* abs451144* abs551144* 0.59 n abs111154* abs141154* abs151154* abs451154* abs551154* hinge lever 0.34 n abs111244* abs141244* abs151244* abs451244* abs551244* 0.54 n abs111254* abs141254* abs151254* abs451254* abs551254* long hinge lever 0.25 n abs111344* abs141344* abs151344* abs451344* abs551344* 0.44 n abs111354* abs141354* abs151354* abs451354* abs551354* simulated roller lever 0.34 n abs111444* abs141444* abs151444* abs451444* abs551444* 0.54 n abs111454* abs141454* abs151454* abs451454* abs551454* roller lever 0.39 n abs111644* abs141644* abs151644* abs451644* abs551644* 0.59 n abs111654* abs141654* abs151654* abs451654* abs551654* all rights reserved ?copyright matsushita electric works, ltd.
2. immersion protected type (3 wire leads type spdt) agni alloy au-clad triple layer au-clad double layer * agency standard: please refer to ?rdering information? actuator operating force max. spdt wire position straight right angle left angle pin plunger 0.98 n abs161040* abs461040* abs561040* 1.47 n abs161050* abs461050* abs561050* short hinge lever 0.39 n abs161140* abs461140* abs561140* 0.59 n abs161150* abs461150* abs561150* hinge lever 0.34 n abs161240* abs461240* abs561240* 0.54 n abs161250* abs461250* abs561250* long hinge lever 0.25 n abs161340* abs461340* abs561340* 0.44 n abs161350* abs461350* abs561350* simulated roller lever 0.34 n abs161440* abs461440* abs561440* 0.54 n abs161450* abs461450* abs561450* roller lever 0.39 n abs161640* abs461640* abs561640* 0.59 n abs161650* abs461650* abs561650* actuator operating force max. spdt wire position straight right angle left angle pin plunger 0.98 n abs161041* abs461041* abs561041* 1.47 n abs161051* abs461051* abs561051* short hinge lever 0.39 n abs161141* abs461141* abs561141* 0.59 n abs161151* abs461151* abs561151* hinge lever 0.34 n abs161241* abs461241* abs561241* 0.54 n abs161251* abs461251* abs561251* long hinge lever 0.25 n abs161341* abs461341* abs561341* 0.44 n abs161351* abs461351* abs561351* simulated roller lever 0.34 n abs161441* abs461441* abs561441* 0.54 n abs161451* abs461451* abs561451* roller lever 0.39 n abs161641* abs461641* abs561641* 0.59 n abs161651* abs461651* abs561651* actuator operating force max. spdt wire position straight right angle left angle pin plunger 0.98 n abs161044* abs461044* abs561044* 1.47 n abs161054* abs461054* abs561054* short hinge lever 0.39 n abs161144* abs461144* abs561144* 0.59 n abs161154* abs461154* abs561154* hinge lever 0.34 n abs161244* abs461244* abs561244* 0.54 n abs161254* abs461254* abs561254* long hinge lever 0.25 n abs161344* abs461344* abs561344* 0.44 n abs161354* abs461354* abs561354* simulated roller lever 0.34 n abs161444* abs461444* abs561444* 0.54 n abs161454* abs461454* abs561454* roller lever 0.39 n abs161644* abs461644* abs561644* 0.59 n abs161654* abs461654* abs561654* abs1,4,5 all rights reserved ?copyright matsushita electric works, ltd.
abs1,4,5 3. immersion protected type (2 wire leads type spst-nc) agni alloy au-clad triple layer au-clad double layer * agency standard: please refer to ?rdering information? actuator operating force max. spst-nc wire position straight right angle left angle pin plunger 0.98 n abs162040* abs462040* abs562040* 1.47 n abs162050* abs462050* abs562050* short hinge lever 0.39 n abs162140* abs462140* abs562140* 0.59 n abs162150* abs462150* abs562150* hinge lever 0.34 n abs162240* abs462240* abs562240* 0.54 n abs162250* abs462250* abs562250* long hinge lever 0.25 n abs162340* abs462340* abs562340* 0.44 n abs162350* abs462350* abs562350* simulated roller lever 0.34 n abs162440* abs462440* abs562440* 0.54 n abs162450* abs462450* abs562450* roller lever 0.39 n abs162640* abs462640* abs562640* 0.59 n abs162650* abs462650* abs562650* actuator operating force max. spst-nc wire position straight right angle left angle pin plunger 0.98 n abs162041* abs462041* abs562041* 1.47 n abs162051* abs462051* abs562051* short hinge lever 0.39 n abs162141* abs462141* abs562141* 0.59 n abs162151* abs462151* abs562151* hinge lever 0.34 n abs162241* abs462241* abs562241* 0.54 n abs162251* abs462251* abs562251* long hinge lever 0.25 n abs162341* abs462341* abs562341* 0.44 n abs162351* abs462351* abs562351* simulated roller lever 0.34 n abs162441* abs462441* abs562441* 0.54 n abs162451* abs462451* abs562451* roller lever 0.39 n abs162641* abs462641* abs562641* 0.59 n abs162651* abs462651* abs562651* actuator operating force max. spst-nc wire position straight right angle left angle pin plunger 0.98 n abs162044* abs462044* abs562044* 1.47 n abs162054* abs462054* abs562054* short hinge lever 0.39 n abs162144* abs462144* abs562144* 0.59 n abs162154* abs462154* abs562154* hinge lever 0.34 n abs162244* abs462244* abs562244* 0.54 n abs162254* abs462254* abs562254* long hinge lever 0.25 n abs162344* abs462344* abs562344* 0.44 n abs162354* abs462354* abs562354* simulated roller lever 0.34 n abs162444* abs462444* abs562444* 0.54 n abs162454* abs462454* abs562454* roller lever 0.39 n abs162644* abs462644* abs562644* 0.59 n abs162654* abs462654* abs562654* all rights reserved ?copyright matsushita electric works, ltd.
4. immersion protected type (2 wire leads type spst-no) agni alloy au-clad triple layer au-clad double layer * agency standard: please refer to ?rdering information? actuator operating force max. spst-no wire position straight right angle left angle pin plunger 0.98 n abs163040* abs463040* abs563040* 1.47 n abs163050* abs463050* abs563050* short hinge lever 0.39 n abs163140* abs463140* abs563140* 0.59 n abs163150* abs463150* abs563150* hinge lever 0.34 n abs163240* abs463240* abs563240* 0.54 n abs163250* abs463250* abs563250* long hinge lever 0.25 n abs163340* abs463340* abs563340* 0.44 n abs163350* abs463350* abs563350* simulated roller lever 0.34 n abs163440* abs463440* abs563440* 0.54 n abs163450* abs463450* abs563450* roller lever 0.39 n abs163640* abs463640* abs563640* 0.59 n abs163650* abs463650* abs563650* actuator operating force max. spst-no wire position straight right angle left angle pin plunger 0.98 n abs163041* abs463041* abs563041* 1.47 n abs163051* abs463051* abs563051* short hinge lever 0.39 n abs163141* abs463141* abs563141* 0.59 n abs163151* abs463151* abs563151* hinge lever 0.34 n abs163241* abs463241* abs563241* 0.54 n abs163251* abs463251* abs563251* long hinge lever 0.25 n abs163341* abs463341* abs563341* 0.44 n abs163351* abs463351* abs563351* simulated roller lever 0.34 n abs163441* abs463441* abs563441* 0.54 n abs163451* abs463451* abs563451* roller lever 0.39 n abs163641* abs463641* abs563641* 0.59 n abs163651* abs463651* abs563651* actuator operating force max. spst-no wire position straight right angle left angle pin plunger 0.98 n abs163044* abs463044* abs563044* 1.47 n abs163054* abs463054* abs563054* short hinge lever 0.39 n abs163144* abs463144* abs563144* 0.59 n abs163154* abs463154* abs563154* hinge lever 0.34 n abs163244* abs463244* abs563244* 0.54 n abs163254* abs463254* abs563254* long hinge lever 0.25 n abs163344* abs463344* abs563344* 0.44 n abs163354* abs463354* abs563354* simulated roller lever 0.34 n abs163444* abs463444* abs563444* 0.54 n abs163454* abs463454* abs563454* roller lever 0.39 n abs163644* abs463644* abs563644* 0.59 n abs163654* abs463654* abs563654* abs1,4,5 all rights reserved ?copyright matsushita electric works, ltd.
abs1,4,5 5. immersion protected type (3 wire leads type spdt) ?leaf lever type agni alloy au-clad triple layer au-clad double layer 6. immersion protected type (2 wire leads type spst-nc) ?leaf lever type agni alloy au-clad triple layer au-clad double layer 7. immersion protected type (2 wire leads type spst-no) ?leaf lever type agni alloy au-clad triple layer * agency standard: please refer to ?rdering information? actuator operating force max. spdt wire position straight right angle left angle leaf lever 0.88 n abs161840* abs461840* abs561840* 1.08 n abs161850* abs461850* abs561850* actuator operating force max. spdt wire position straight right angle left angle leaf lever 0.88 n abs161841* abs461841* abs561841* 1.08 n abs161851* abs461851* abs561851* actuator operating force max. spdt wire position straight right angle left angle leaf lever 0.88 n abs161844* abs461844* abs561844* 1.08 n abs161854* abs461854* abs561854* actuator operating force max. spst-nc wire position straight right angle left angle leaf lever 0.88 n abs162840* abs462840* abs562840* 1.08 n abs162850* abs462850* abs562850* actuator operating force max. spst-nc wire position straight right angle left angle leaf lever 0.88 n abs162841* abs462841* abs562841* 1.08 n abs162851* abs462851* abs562851* actuator operating force max. spst-nc wire position straight right angle left angle leaf lever 0.88 n abs162844* abs462844* abs562844* 1.08 n abs162854* abs462854* abs562854* actuator operating force max. spst-no wire position straight right angle left angle leaf lever 0.88 n abs163840* abs463840* abs563840* 1.08 n abs163850* abs463850* abs563850* actuator operating force max. spst-no wire position straight right angle left angle leaf lever 0.88 n abs163841* abs463841* abs563841* 1.08 n abs163851* abs463851* abs563851* all rights reserved ?copyright matsushita electric works, ltd.
au-clad double layer * agency standard: please refer to ?rdering information? specifications 2. characteristics 3. operating characteristics actuator operating force max. gf spst-no wire position straight right angle left angle leaf lever 0.89 n abs163844* abs463844* abs563844* 1.08 n abs163854* abs463854* abs563854* mechanical life (o.t.: speci?d value) leaf lever min. 5x10 5 (at 60 cpm) other types min. 5x10 6 (at 60 cpm) electrical life at rated load (o.t.: max.) agni alloy contact type min. 5x10 4 (at 20 cpm) au-clad contact type min. 2x10 5 (at 20 cpm) insulation resistance min. 100 m ? (at 500 v dc insulation resistance meter) dielectric strength between non-continuous terminals between each terminal and other exposed metal parts between each terminal and ground 1,000 vrms 1,500 vrms 1,500 vrms vibration resistance (pin plunger type) 10 to 55 hz at single amplitude of 0.75 mm (contact opening max. 1 msec.) shock resistance (pin plunger type) min. 294 m/s 2 (contact opening max. 1 msec.) contact resistance (initial) agni alloy contact type dust protected type (ip50): max. 50 m ? immersion protected type (ip67): max. 100 m ? (by voltage drop 1 a 6 to 8 v dc) au-clad contact type dust protected type (ip50): max. 100 m ? immersion protected type (ip67): max. 150 m ? (by voltage drop 0.1 a 6 to 8 v dc) allowable operating speed (at no load) 0.1 to 500 mm/sec. max. operating cycle rate (at no load) 120 cpm ambient temperature ?0 c to +85 c unit weight approx. 2 g (ip50 type) type of actuator operating force, max. release force, min. pretravel, max. mm movement differential, max. mm overtravel, min. mm operating position, mm pin plunger 0.98n 1.47n 0.15n 0.20n 0.6 0.1 0.4 8.4 0.3 short hinge lever 0.39n 0.59n 0.034n 0.039n 2.5 0.5 0.8 8.8 0.8 hinge lever 0.34n 0.54n 0.029n 0.034n 2.8 0.8 1.2 8.8 0.8 long hinge lever 0.25n 0.44n 0.025n 0.029n 3.5 1.0 1.6 8.8 1.2 simulated roller lever 0.34n 0.54n 0.029n 0.034n 2.8 0.8 1.2 11.65 0.8 roller lever 0.39n 0.59n 0.034n 0.039n 2.5 0.5 0.8 14.5 0.8 leaf lever 0.88n 1.08n 0.17n 0.20n 4.5 1.0 2.5 14.5 1.5 1. contact rating low-level circuit rating (au-clad contact type) voltage agni alloy contact type au-clad contact type au-clad triple layer au-clad twin layer resistive load inductive load resistive load 125 v ac 2 a 2 a 0.1 a 250 v ac 2 a 2 a 0.1 a 30 v dc 2 a 2 a 0.1 a 0.1 a 125 v dc 0.4 a 0.05 a rated voltage resistive load 6 v dc 5 ma 12 v dc 2 ma 24 v dc 1 ma recommended contact material chart classi?d by load voltage & current (reference) remarks: if the contact is being used in the constant low-level circuit load range, the au-clad twin layer contact is recommended. if there is a danger of the current being less than 0.5 a, f or instance if the contact is being turned on and off, the au-clad triple layer type is recommended. silver-alloy gold-clad double layer 2a 100ma 1ma 0 dc ac 5 5 15 30v 30 250v gold-clad triple layer abs1,4,5 all rights reserved ?copyright matsushita electric works, ltd.
abs1,4,5 dimensions mm general tolerance: 0.25 1. dust protected type 1-(1) .110 quick-connect terminal pin plunger 7.6 0.3 3.4 0.1 11 7.1 0.15 5.5 0.1 1.2 0.05 dia. 2.4 7.7 + 0.1 ? 0.05 2.4 2.5 0.1 19.8 0.3 7.6 0.15 7.6 0.15 9.5 0.1 4 2.8 0.1 c0.6 position operating 8.4 0.3 11.8 0.4 6.7 pretravel 0.6 max. 6.4 0.2 1.7 dia. ? 0.05 + 0.1 2.4 dia. pretravel, max. mm 0.6 movement differential, max. mm 0.1 overtravel, min. mm 0.4 operating position distance from mounting hole, mm 8.4 0.3 distance from stand-off, mm 11.8 0.4 short hinge lever 5 0.4 r18 pretravel 2.5 max. 12.85 6.3 4 ( 3.7 ) position 8.8 0.8 operating 12.2 0.9 pretravel, max. mm 2.5 movement differential, max. mm 0.5 overtravel, min. mm 0.8 operating position distance from mounting hole, mm 8.8 0.8 distance from stand-off, mm 12.2 0.9 hinge lever 4 ( 3.7 ) 8.8 0.8 12.2 0.9 7.15 0.4 r20.2 operating pretravel 2.8 max. position pretravel, max. mm 2.8 movement differential, max. mm 0.8 overtravel, min. mm 1.2 operating position distance from mounting hole, mm 8.8 0.8 distance from stand-off, mm 12.2 0.9 long hinge lever 4 ( 3.5 ) position operating 8.8 1.2 r26.1 pretravel 3.5 max. 13.1 0.4 12.2 1.3 pretravel, max. mm 3.5 movement differential, max. mm 1 overtravel, min. mm 1.6 operating position distance from mounting hole, mm 8.8 1.2 distance from stand-off, mm 12.2 1.3 all rights reserved ?copyright matsushita electric works, ltd.
simulated roller lever mm general tolerance: 0.25 pretravel 2.8 max. 11.65 0.8 operating position 15.05 0.9 r2.5 r19.9 4 ( 3.5 ) 6.3 0.4 pretravel, max. mm 2.8 movement differential, max. mm 0.8 overtravel, min. mm 1.2 operating position distance from mounting hole, mm 11.65 0.8 distance from stand-off, mm 15.05 0.9 roller lever 3.2 5 dia. pretravel 2.5 max. 5.15 0.4 17.9 0.9 operating position 14.5 0.8 r18.9 pretravel, max. mm 2.5 movement differential, max. mm 0.5 overtravel, min. mm 0.8 operating position distance from mounting hole, mm 14.5 0.8 distance from stand-off, mm 17.9 0.9 1-(2) solder terminal 3.4 0.15 2.5 0.1 9.5 0.1 8.7 0.15 15.4 0.15 2.8 0.2 19.8 0.3 -0.05 +0.1 2.4 dia. +0.1 -0.05 2.4 2.4 2.4 1.9 7.4 1.1 0.12 1.5 0.12 0.5 1.85 0.2 1.25 0.1 5.2 6.4 0.2 remarks: dimensions of the actuator types are the same as those of corresponding .110 quick-connect terminal types. 1-(3) pc board terminal straight type 1.1 0.12 1.5 0.12 0.5 1.85 0.2 1.25 0.1 5.2 6.4 0.2 8.7 0.15 2.5 0.1 15.4 0.15 19.8 0.3 9.5 0.1 2.2 dia. +0.1 -0.05 2.4 3.4 0.15 +0.1 2.4 7.4 2.4 -0.05 0.9 8.7 0.1 15.4 0.1 1.2 0.05 dia. remarks: dimensions of the actuator types are the same as those of corresponding .110 quick-connect terminal types. abs1,4,5 all rights reserved ?copyright matsushita electric works, ltd.
abs1,4,5 right angle type mm general tolerance: 0.25 7.62 0.15 7.62 0.15 0.5 5.08 0.2 6.4 7.62 0.1 3-1.5 0.05 dia. 7.62 0.1 remarks: dimensions of the actuator types are the same as those of corresponding .110 quick-connect terminal types. left angle type 5.08 0.2 0.5 6.4 7.62 0.15 7.62 0.15 1.3 7.62 0.15 7.62 0.15 ( 2.8 ) 1.3 3.2 6.4 6-c0.3 7.62 0.1 3-1.5 0.05 dia. 7.62 0.1 remarks: dimensions of the actuator types are the same as those of corresponding .110 quick-connect terminal types. 2. immersion protected type wire leads pin plunger straight type com no nc 21.2 9.2 300 10 5 2 dia. -0.05 +0.1 2.4 6.4 thickness of the lead wire: 0.5 mm 2 ul/csa approved type and right/left angle type: awg #20 color of the lead wire: com ...black n.c. ...red n.o. ...white remarks: 1. other dimensions are the same as those of .110 quick-connect terminal types. 2. dimensions of the actuator types are the same as those of corresponding .110 quick- connect terminal types. right angle type left angle type 5 2 300 10 5 2 300 10 all rights reserved ?copyright matsushita electric works, ltd.
leaf lever mm general tolerance: 0.25 straight type pretravel 4.5 max. 1.5 free position ( 16.5 ) 14.5 1.5 operating position totaltravel position ( 10.5 min. ) 7.6 0.3 8 1 23.8 0.4 5 2 300 10 2.4 dia. -0.05 +0.1 5 6.4 7.7 8.4 8.4 2.5 0.1 thickness of the lead wire: 0.5 mm 2 ul/csa approved type and right/left angle type: awg #20 color of the lead wire: com ...black n.c. ...red n.o. ...white right angle type left angle type 5 6.4 300 10 5 2 5 6.4 300 10 5 2 abs1,4,5 all rights reserved ?copyright matsushita electric works, ltd.

▲Up To Search▲

Price & Availability of 3418

	To Download 3418 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .